### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # ### update-modules: start processing /etc/modutils/0keep # DO NOT MODIFY THIS FILE! # This file is not marked as conffile to make sure if you upgrade modutils # it will be restored in case some modifications have been made. # # The keep command is necessary to prevent insmod and friends from ignoring # the builtin defaults of a path-statement is encountered. Until all other # packages use the new `add path'-statement this keep-statement is essential # to keep your system working keep ### update-modules: end processing /etc/modutils/0keep ### update-modules: start processing /etc/modutils/actions # Special actions that are needed for some modules # The BTTV module does not load the tuner module automatically, # so do that in here post-install bttv insmod tuner post-remove bttv rmmod tuner ### update-modules: end processing /etc/modutils/actions ### update-modules: start processing /etc/modutils/aliases # Aliases to tell insmod/modprobe which modules to use # Uncomment the network protocols you don't want loaded: # alias net-pf-1 off # Unix # alias net-pf-2 off # IPv4 # alias net-pf-3 off # Amateur Radio AX.25 # alias net-pf-4 off # IPX # alias net-pf-5 off # DDP / appletalk # alias net-pf-6 off # Amateur Radio NET/ROM # alias net-pf-9 off # X.25 # alias net-pf-10 off # IPv6 # alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP # alias net-pf-19 off # Acorn Econet alias char-major-10-175 agpgart alias char-major-10-200 tun alias char-major-81 bttv alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate # Crypto modules (see http://www.kerneli.org/) alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5 #TG customized Dell Inspiron 600m section #cd-rw/dvd also need /etc/lilo.conf append="hdc=ide-scsi" probeall scsi_hostadapter ide-scsi #usb probeall usb-interface usb-uhci ehci-hcd #on board ethernet alias eth0 tg3 #Dell TM 1150 mini-pci wireless not Broadcom alias eth1 orinoco_cs #pcmcia ethernet alias eth2 3c574_cs #TG trying 2.6 and alsa #onboard audio will try alsa later #alias sound-slot-0 i810_audio #alias sound i810_audio #ALSA portion alias char-major-116 snd alias snd-card-0 snd-intel8x0 # OSS/Free portion alias char-major-14 soundcore alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss #USB webcam post-install pwc /sbin/insmod --force /lib/modules/2.4.24/kernel/drivers/usb/pwcx.o post-install pwc /sbin/insmod audio alias sound1 audio alias sound-slot-1 audio alias sound-service-1-0 audio #Dell laptop data, incomplete on this model install i8k insmod i8k force=1 install agpgart insmod agpgart agp_try_unsupported=1 #on-board soft-modem install pctel insmod pctel install ptserial insmod ptserial irq=11 iobase=0xb400 iobase1=0xb080 country_code=1 #infrared, either irport for irda stuff or lirc_sir for ir remote #there's another irda seciton that has some tweaks being tested options irport io=0x02e8 irq=3 alias char-major-61 lirc_sir install lirc_sir insmod lirc_sir io=0x02e8 irq=3 #end customized Dell Inspiron 600m section ### update-modules: end processing /etc/modutils/aliases ### update-modules: start processing /etc/modutils/alsa ### DEBCONF MAGIC # This file was automatically generated by alsa-base's debconf stuff alias char-major-116 snd alias char-major-14 soundcore options snd major=116 cards_limit=4 options snd-intel8x0 ac97_quirk=3 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss alias /dev/dsp* snd-pcm-oss alias snd-card-0 snd-intel8x0 alias snd-slot-0 snd-card-0 alias sound-slot-0 snd-slot-0 ### update-modules: end processing /etc/modutils/alsa ### update-modules: start processing /etc/modutils/alsa-base above snd-pcm snd-pcm-oss ### update-modules: end processing /etc/modutils/alsa-base ### update-modules: start processing /etc/modutils/apm alias char-major-10-134 apm alias /dev/apm_bios /dev/misc/apm_bios alias /dev/misc/apm_bios apm ### update-modules: end processing /etc/modutils/apm ### update-modules: start processing /etc/modutils/bluez # BlueZ modules alias net-pf-31 bluez alias bt-proto-0 l2cap alias bt-proto-2 sco alias bt-proto-3 rfcomm alias bt-proto-4 bnep alias bt-proto-5 cmtp alias bt-proto-6 hidp alias tty-ldisc-15 hci_uart alias char-major-10-250 hci_vhci ### update-modules: end processing /etc/modutils/bluez ### update-modules: start processing /etc/modutils/i2c alias char-major-89 i2c-dev ### update-modules: end processing /etc/modutils/i2c ### update-modules: start processing /etc/modutils/irda #TG changing since we use irport instead #alias tty-ldisc-11 irtty alias tty-ldisc-11 irport alias irda0 irport # The following is for new kernel. alias char-major-161 ircomm-tty alias char-major-160 irda0 # The following is for old kernel. #alias char-major-60 ircomm_tty # To be able to attach some dongles alias irda-dongle-0 tekram alias irda-dongle-1 esi alias irda-dongle-2 actisys alias irda-dongle-3 actisys alias irda-dongle-4 girbil alias irda-dongle-5 litelink alias irda-dongle-6 airport alias irda-dongle-7 old_belkin # FIR device drivers. # options smc-ircc ircc_irq= ircc_dma= # alias irda0 smc-ircc # options toshoboe max_baud= # alias irda0 toshoboe # options w83977af_ir io= io2= irq= qos_mtt_bits= # alias irda0 w83977af_ir # To use the NSC driver on a Thinkpad laptop: uncomment the following: # options nsc-ircc dongle_id=0x09 # alias irda0 nsc-ircc ### update-modules: end processing /etc/modutils/irda ### update-modules: start processing /etc/modutils/lirc #This file is modified by lirc's maintainer scripts. #Any 'options' line asociated with the selected hardware will be replaced. #However 'add options' lines will be left alone, so you can use that for #additional module parameters. # ej: # add options lirc_serial sense=0 options lirc_sir io=0x02e8 irq=3 ### update-modules: end processing /etc/modutils/lirc ### update-modules: start processing /etc/modutils/paths # This file contains a list of paths that modprobe should scan, # beside the ones that are compiled into the modutils tools # themselves. ### update-modules: end processing /etc/modutils/paths ### update-modules: start processing /etc/modutils/ppp alias /dev/ppp ppp_generic alias char-major-108 ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate ### update-modules: end processing /etc/modutils/ppp ### update-modules: start processing /etc/modutils/setserial # # This is what I wanted to do, but logger is in /usr/bin, which isn't loaded # when the module is first loaded into the kernel at boot time! # #post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload" #pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload" # alias /dev/tts serial alias /dev/tts/0 serial alias /dev/tts/1 serial alias /dev/tts/2 serial alias /dev/tts/3 serial post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null ### update-modules: end processing /etc/modutils/setserial ### update-modules: start processing /etc/modutils/arch/i386 alias parport_lowlevel parport_pc alias char-major-10-144 nvram alias binfmt-0064 binfmt_aout alias char-major-10-135 rtc ### update-modules: end processing /etc/modutils/arch/i386